In recent years, the stationary concrete batching plant made in china has been favoured by international market, and we also have successful cases every month. Our engineers are busy working for the free installation and operation guideline for our customers. After the concrete batching plants are set up, our engineers always supply systematic training about the machinery operation and tips for improve the mixing efficiency and mixing quality.

The mixing sequence and time are very important factors that affect the mixing efficiency and mixing quality of the stationary concrete batching plant made in china, So this is the first aspect we suggest to the operators. When mixing, it is advisable to put fine aggregate, cement, mineral admixture and admixture into the concrete mixer firstly. After these materials are mixed uniform, add the required water. After the mortar is fully stirred, add the coarse aggregate and continue to stir until it is even. The stirring time of each stage mentioned above should not be less than 30s, and the total mixing time should not be less than 2min, and should not exceed 3min, thus the mixing process is well, fully, without segregation and bleeding. All additives (powders) must be added by weight method, and volumetric methods are strictly prohibited. Each stationary concrete batching plant must be equipped with a case, the mixture should be packaged in small plastic bags, and added together with cement. Admixture (aqueous agent) should be electronically metered.

Choosing the stationary concrete batching plant made in China not only stands for low cost and high quality, with our after sales service and technical operation guidelines, the mixing capacity can be improved greatly, which not only boom the productivity, but also will benefit your business.