Haomei supply self mixing concrete truck for sale with mixing capacity of 1.2-6.5 cubic meter. The self loading concrete mixer truck adopt reliable hydraulic system and engine to ensure the long service life and high mixing efficiency. Everyone want to buy self mixing concrete truck with high quality, so there are some issues that we should pay attention to before purchase order.



Inspection rules of self mixing concrete truck for sale are:
1, The components of the water pump and water supply system are complete and must not leak.
2, Safety device inspection procedure:
(1), The hydraulic system must be equipped with safety devices to prevent overload and hydraulic shock. The regulating pressure of the safety relief valve shall not exceed the rated pressure of the hydraulic pump.
(2), The side and back protection devices of the self mixing concrete truck must be intact.
(3), Self loading concrete mixer truck must be equipped with fire extinguishing equipment.
 
3, Check rules of system:
(1), The cylinder must be in good contact with the support wheel and must not escape, shift or be significantly deformed.
(2), There is no crack or damage in the buffer of the mixing tank frame. The blades, hopper, main drain and auxiliary drain of the mixing tank must not be severely worn or deformed.
(3), There should be no obvious concrete blocks in the mixing tank, feed hopper, main drainage channel and auxiliary drainage channel.
 
4, Inspection procedure of hydraulic system of self mixing concrete truck for sale:
(1), The power take-off must be stable during operation, the pressure must meet the rated requirements of the design, and there must be no leakage.
(2), The components of the hydraulic system must be complete and complete, and the working pressure of the system must meet the requirements of the manual.
(3), The type, quality, quantity and use of hydraulic oil must comply with relevant regulations. The oil temperature when the heat pump is running should not exceed 80°C. The pipe connection must be reliable.
(4), The movement of each hydraulic control component must be flexible and reliable.