JS double shaft concrete mixer made in china
JS double shaft concrete mixer made in china has very extensive application, in addition to used as concrete mixing machine alone, but also can be the concrete mixer of a concrete batching plant. Double shaft concrete mixer is very important in concrete mixing, so we reminds everyone to pay attention to these issues when buying js concrete mixers.
1.Check the oil pump of the JS double shaft concrete mixer
The JS double shaft concrete mixer is equipped with 4 oil pumps, and the four shaft ends of the two stirring shafts are lubricated to prevent the slurry from wearing the bearing, so the high quality js twin shaft concrete mixer must have good oil pumps, small concrete mixer usually adopts manual oil pumps, while large concrete mixers are generally automatic oil pumps.
2.Check the bolt connection of the JS concrete mixers
Which is why it is recommended to check the machine on site, check the sample stocking products, and wait until the concrete mixer arrives at the construction site, and check again.
3.Pneumatic equipment is the key
The JS double shaft concrete mixer is the core part of the concrete batching plant. Naturally, large concrete mixers need to be equipped with independent air compressors, and we need to check whether these pneumatic valves can be opened normally.
4. Check the fixing and material of the mixing shaft, blade, mixing arm, etc. in the mixing drum. These are the vulnerable parts of the JS twin shaft concrete mixing machine.
5. Check the water supply equipment of the JS concrete mixer made in china, check the unloading condition of the aggregate hopper, and ensure that the js concrete mixing machine can normally put all the raw materials into the stirring.
6. Check that the gap between the js mixing machine blade and the lining plate
It should be no more than 5mm. When it is larger than this gap, it needs to be adjusted at any time. Under normal production conditions, the lining plate of the JS double shaft concrete mixer made in china should be replaced after 37000 times and the blades are 25000 times.
1.Check the oil pump of the JS double shaft concrete mixer
The JS double shaft concrete mixer is equipped with 4 oil pumps, and the four shaft ends of the two stirring shafts are lubricated to prevent the slurry from wearing the bearing, so the high quality js twin shaft concrete mixer must have good oil pumps, small concrete mixer usually adopts manual oil pumps, while large concrete mixers are generally automatic oil pumps.
2.Check the bolt connection of the JS concrete mixers
Which is why it is recommended to check the machine on site, check the sample stocking products, and wait until the concrete mixer arrives at the construction site, and check again.
3.Pneumatic equipment is the key
The JS double shaft concrete mixer is the core part of the concrete batching plant. Naturally, large concrete mixers need to be equipped with independent air compressors, and we need to check whether these pneumatic valves can be opened normally.
4. Check the fixing and material of the mixing shaft, blade, mixing arm, etc. in the mixing drum. These are the vulnerable parts of the JS twin shaft concrete mixing machine.
5. Check the water supply equipment of the JS concrete mixer made in china, check the unloading condition of the aggregate hopper, and ensure that the js concrete mixing machine can normally put all the raw materials into the stirring.
6. Check that the gap between the js mixing machine blade and the lining plate
It should be no more than 5mm. When it is larger than this gap, it needs to be adjusted at any time. Under normal production conditions, the lining plate of the JS double shaft concrete mixer made in china should be replaced after 37000 times and the blades are 25000 times.
Inquiry
| (Please write down the product model or any requirement) | |
| E-mail: | |
| Message: | |
Contact Information
E-mail:chris@concretebatchplant24.com
Tel: +86-371-65621392
Fax:+86-371-86616825
Add : No.14 Waihuan Road,New strict,Zhengzhou,China