Concrete trailer pump for sale are very common among current construction parties. Many construction parties have greatly improved construction efficiency with the help of trailer concrete pumps. However, many people are not clear about the installation of concrete pumps. So what rules do you need to follow when installing a trailer concrete pump? In response to this issue, we visited relevant experts in Haomei Machinery. Experts pointed out that the installation of concrete trailer pumps is not complicated. As long as you master the relevant rules, even friends who don’t know much about concrete pumps can easily install it. Now let’s introduce what rules need to be followed to install trailer concrete pumps?

1, Position placement
When the concrete trailer pump for sale is installed, its location must be solid so as not to sink. Usually, when the trailer-type concrete pump is installed, the feet must be lowered to ensure the horizontal stability of the body, so as to ensure the stability of the concrete pump. During the placement process, it should be prohibited to install the concrete pump in a slope or puddle.
 
2, General rules for pipeline laying
In the process of laying the pipeline, the laying line of the horizontal pumping pipeline should be close to a straight line, with less bends, the pipeline and the pipeline support must be tight and reliable, and the pipeline joints should be sealed reliably. The "Y" type pipe is connected to the tapered pipe, so as to ensure that the pipe is in good condition.
 
3, Special conditions laying rules
When laying, it is strictly forbidden to connect the vertical pipeline directly to the trailer concrete pump outlet. The front end of the vertical pipe should be installed with a horizontal pipe with a length of not less than 10 meters. The horizontal pipe can be installed near the pump with a check valve. When laying a downwardly inclined pipeline, a horizontal pipe can be installed at the lower end, the length of which should be at least five times the height difference of the inclined pipe, otherwise, the resistance can be increased by means of bending pipes. If the slope is large, if necessary, an exhaust valve can be installed at the upper end of the slope to facilitate exhaust.
 
4, Concrete mix ratio
In the construction process, the sand and gravel particle size, cement number and mix ratio should meet the requirements of pumpability of the concrete trailer pump for sale according to the original factory regulations, so that the construction can proceed smoothly.