Concrete mixer plant manufacturers Haomei not only supply high quality concrete mixer plant, but also offer professional maintenance advice to customers. The central concrete mixer is responsible for the mixing and weighing of various materials into the concrete of the product. Whether the maintenance is in place will directly affect the service life of the concrete mixing plant.

Here are the guidelines of concrete mixer plant factory on the maintenance of concrete mixer.
1, check the lubrication of stationary concrete mixer plant
When the concrete mixing machine is working, check whether the grease pump wiper is working properly.
2, query grease pump pressure gauge value
Under normal circumstances, the working pressure is 10, if the pressure is lower than 10, the grease pump pump core may be blocked. If the pressure is higher than 60, the distribution valve may be blocked or the rear pipeline may be blocked.
3, there is a spare grease fitting on each shaft head
Press the top bead of the grease tip with your finger. If there is grease, it proves that the shaft head is lubricated in place, otherwise the shaft head lubrication is not in place.
4, in the automatic production state
The manual handle of the mixing main unit discharge door should be in the retracted orientation, and the ball valve is in the neutral position. The two hands should be completely replaced with the screw plugs to avoid premature damage of the hand pump.
5, pay attention to timely refueling and oil change of the gear box
Check if the gear oil is satisfied, and be sure to check the oil level of the oil indicator.
6, check the gearbox for the appearance of oil leakage
The leakage of the concrete mixer gearbox is the input and output shaft seals, and the oil temperature sensor.
7, Concrete mixer plant manufacturers suggest that the mixing shaft and mixing blade should be cleaned every working cycle to avoid the material stuck on the axle.