Concrete batching plant malaysia configuration is greatly affected by the output of concrete in the production line. Therefore the configuration of the concrete mixing plant Malaysia needs to be in accordance with the output requirements. Building a concrete batching plant in Malaysia requires a lot of resources and equipment, so how much should be configured? Below are some configurations of the concrete batching plant for your reference.

1, Configure according to project duration, total amount of concrete, daily concrete consumption, etc.
The host and feeding batching system of concrete batching plant malaysia are suitable for concrete consumption; one concrete mixer and related feeding batching system is a production line; general projects generally set up one production line, larger and important projects can set up two production lines, arranged side by side, so that the supply of engineering concrete is not interrupted; a project generally sets up a concrete batching plant, or it can be set up according to the partition, or a large-scale concrete mixing station can be set up in a centralized manner, and equipped with an appropriate amount of concrete transport vehicles; the specific situation depends on the actual situation.

2, The concrete aggregate site should be larger to meet the needs of the project
The sand and gravel should be stacked in different areas, and the mixture should not be stacked to make the concrete ratio inaccurate; it should be equipped with trucks to feed the sand and gravel, and the sand and gravel should be stacked neatly; the site should be hardened to facilitate the loading of vehicles, and prevent soil and other sundries from entering the material.

3, A concrete batching plant malaysia is equipped with a suitable water tank, which can meet the needs of concrete mixing and mechanical cleaning
A production line should be equipped with an appropriate number of cement silos, which are used in turn and supplemented to meet the needs of concrete production, without backlogs of cement. A large amount of concrete generally needs to be mixed with admixtures and fly ash, etc., and then stacked according to the site conditions.

4, The way of conveying the finished concrete in the later stage can choose the way of concrete pump
The conveying method is adapted to the conveying distance, conveying height and concrete supply. It is generally placed in front of the concrete mixer and connected to the pouring site through a pipe, or it can be placed next to the pouring site and sent to the pumping station by a transport vehicle.

The above is the configuration method and quantity of some supporting devices when configuring the concrete batching plant malaysia, which can be used as a reference for those who need to build a concrete mixing station in Malaysia.