Generally, belt conveyor concrete batching plant are large-scale concrete plants use belt conveyors to transport aggregates. Because belt conveyors have high efficiency, it can be said that they are one of the necessary equipment for concrete batching plants to improve work efficiency. Aggregate is transported from the flat belt conveyor to the main machine by inclined belts. The operation speed of the conveyor belt in the concrete batching plant will be shown to us in the following content from these methods, so let's take a look.

The operating speed of the conveyor belt of the belt conveyor concrete batching plant is generally not greater than 2.5m/s during operation, and the material with relatively large block size and high abrasiveness and the application of fixed discharge equipment should choose a low-speed gear as much as possible. The diameter of the drive roller of the roller belt conveyor is related to the cloth layer of the conveyor belt in belt type concrete batching plant. The collocation of the drive pulley and the reversing pulley and the standard for the groove angle of the idler should be selected according to the design requirements of the conveyor belt conveyor.

1, Prevent the conveyor belt from being blocked by racks, pillars or block materials, and prevent it from being broken and torn. When local damage to the conveyor belt is found, use rayon to repair it in time to avoid damage and expansion and cause production accidents. In order to reduce the materials falling impact force on the conveyor belt should be chute, material drop distance can be reduced.
2, In the receiving section of the conveyor belt, the distance between the idlers should be shortened and the buffer idler should be used to prevent material leakage. The belt conveyor concrete batching plant should use a soft and moderate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the conveyor belt.
3, When the conveyor is in use, if the idler is missing, it should be added and repaired in time. The idler is covered by the material, causing the rotation to fail, preventing the leakage of the material from being stuck between the roller and the belt. Pay attention to the lubrication of the moving parts of the conveyor belt, but do not contaminate the conveyor belt with oil to avoid the conveyor belt running under load.
4, If the conveyor belt deviates, effective measures should be taken immediately to correct it. During the entire operation of the conveyor belt body, if the supporting force is not balanced, it will cause the conveyor belt to deviate when one side is loose and the other is tight. If the thickness of the belt body is different on both sides, that is, one side is thick and the other is thin, the conveyor belt will also deviate. In the production process of the flame retardant belt, the support force is not equal, and the belt conveyor will also be deviated. Therefore, the belt conveyor should pay attention to these problems during operation.