How can we operate the concrete mixer well?

Before we operate the concrete mixing machine, we need to know some main steps of this machine. You know, when we know it much better, we can operate this concrete mixing machine well and avoid some troubles. Firstly, we need to make the shaft work well with pressing the button. And then add some materials, including some aggregate and cement and sand into hopper. And we also need to make sure the order of these materials, usually we add by this order, stone, cement and sand. You know , after we prepare the materials department, we need to make sure that lifting electric motor of concrete mixer can rise to the orbit to discharge the materials, and then after finishing these things, the hopper need to be the lowest place to work again to keep it continuously. At this moment, we need to turn on the switch of water pump, making the water pour into mixing drum, and the all materials can be mixing immediately. After mixing, we’d better press the button of rotating to make the mixing drum have a certain angle, and the materials will be out in the discharging outlet, then we will press the tip-over to begin the next working procedure. Well, that is the whole process of working for this machine. the procedures all suitable for all of this kind of machines, so if you have some ideas, or you have some difference or questions, you are welcomed to contact me at any time.