Concrete batching plant working steps

1. After we finish weighting, the materials will be put out in the outlet

2. After the measurement, unloading to work flat belts, flat belts through the stripe

3. the belt conveyor will be sent to the upper portion of the hopper mixer, and then waiting for instructions, while cement and fly ash and other additives are pumped by the pump and are transported to the weighing hoppers and the metering;

4. Complete a variety of measurements, and the command is issued by the control system, the material should be in order to throw mixer for mixing;

5. After stirring is complete, we should open the mixer discharge gate and uploaded into concrete mixer 
through the discharge hopper, then enter the next cycle of work.