Batching plant concrete equipment control system

There are some aspects we need to check before we start up mobile concrete batching plant, while haomei will share you with these parts:

1.The limit position switch is normal or not.

2.The alarm on computer system

3.Concrete mixer and belt

4.Air compressor pressure

5.Automatic concrete switch

The control system of ready mixed concrete batching plant should adjust "manual" to" automatic "; and then open the emergency stop button switch, at this moment, you should control the power supply by manual, PLC and instrument power supply display normal, open the ups, and check computer. Besides, we need to make sure that switch shou be in off situation, and the safety of wire.

When we check the control system, we need to check some aspects according to somestandards, while today we will share with you:

1.if you are not farmiliar with these procedures, we need to do according to instructions.

2.To check computer is normal or not before working.

3.Open the bottom valve of silo, admixture, and inlet valve.

4.When the pump and inlet valve aggregate storehouse is filled, the host should be empty, the middle position of each object all needs to be carefully checked.