Attentions before operating the concrete mixing plant

1. If the power distance of concrete mixer exceeds 30m, you must use more than 6mm diameter copper cables or more than 10mm diameter aluminum cables;

2, the mixer operating starting voltage can not be less than 360V;

3, the mixer must ensure proper mixing bucket turn in the right direction before lifting hopper, and it is prohibited to lift hopper in the wrong direction.

4, when we use the concrete mixer, we must keep a horizontal position for this machine and we can also have a slightly lower in discharge end. Besides, we can not make the whole machine be slightly line on the entry end.

5, before we turn off the concrete mixing machine, we should put the right amount of stones and water, stirring 3-5rpm reversal release, repeated several times to remove the mixing bucket of slag accumulation, continuous operation, each of the sets of classes should clear up once;

6, if the jump rope reels, you must immediately stop, later transferred back to its original position and continue to use;

7, dragged several can not be exceeded for 20km / h